EPRO P RO System

EPRO P RO System


Request a Quote

Or Call For Pricing: 1.800.420.4056 x1723


EPRO ™ P systems are designed to maximize water purification efficiency and produce high-quality clean water from tap water or brackish water. Clean water is dispensed from the system’s pressurization tank for immediate use, such as in laboratory applications.

Features and Specs

  • Complete RO systems with efficient, high quality pumps, motors, and membranes for energy savings and low maintenance
  • Up to 99.4% purification rate 2 provides clean water with improved wash/rinse characteristics, reducing service cost of equipment and appliances by removing harmful chemicals and minerals
  • Up to 50% recovery rates 3 minimize water waste
  • Compact, pre-assembled design enables installation in under 2 hours, limiting start-up costs and space requirements
  • 20 gallon repressurization bladder tank (7.4 gal. draw-down)
  • Pure water dispenses from threaded tap on front panel
  • Automatic feed water shutoff valve
  • Automatic tank level control (RO refills tank)
  • Flow meters for product and discarded water
  • Liquid filled pressure gauges
  • Electronic controller with low-flow switch
  • 5 micron sediment pre-filter
  • Self-priming pump dispenses 3 GPM at 50 PSI (0.01 m 3 at 446 kPa)
  • 110/220 V 1 phase 60 Hz TEFC motor

              Applications

              • Purification of home water supply
              • Car wash rinse water (for spot-free shine)
              • Laundries and cleaners
              • Food and beverage production, bottling
              • Pharmaceutical production/laboratories
              • Paint and assembly
              • Electronics fabrication
              • Boiler & cooling tower makeup water
              • Misting, humidification
              • Nurseries, greenhouses
              • Commercial printing

              Options

              • Coldwater membranes (when using cold water source)
              • Digital TDS monitor on control box
              • Recycle flow meter and throttling valve
              • Permeate and auto-flush
              • Higher-volume dispensing pumps: 4 GPM at 50 PSI (0.015 m 3 at 446 kPA), 9 GPM at 30 PSI (0.034 m 3 at 308 kPa)
              • 110/220 V 1 phase 50Hz TEFC motor

              Click here for a downloadable PDF